TA Triumph-Adler DC 2435 - Manual (Page 70)

FAX Operation (Advanced)
4-2
Long Originals
Use the optional document processor to scan long originals (originals that are longer in the paper feeding
direction).
NOTE: Only a single side of a long original can be sent.
Originals of up to 1,600 mm/63" long can be scanned.
1 Press the FAX key.
2 Place the originals in the optional document
processor.
3 Press [Original/Sending Data Format], and then
[Long Original].
4 To scan long originals, press [On], and to scan
standard size originals, press [Off].
5 Press [OK].
6 Set the destination, and press the Start key.
Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-12.