TA Triumph-Adler DC 2435 - Manual (Page 50)

FAX Operation (Basic)
3-10
receiving the originals at such image quality. When
the receiving system does not have such capability,
originals are sent at an image quality of 200 × 200
dpi (Fine).
3 Press [OK].
Selecting the original size
Set the size of the original to be faxed.
1 Press [Org./Sending Data Format], and then
[Original Size]. The original size setting screen
appears.
NOTE: If the Start key is pressed without setting
the original size, the original size setting screen
will appear prior to transmission.
2 Select the original size.
* The input units can be changed in the System menu. Refer to the machine’s Operation Guide.
3 Press [OK].
Item How to Select Detail
Standard
Sizes 1 Have the size of original
detected automatically, or
select from the standard
sizes. Inch models: Auto, Ledger, Letter-R, Letter, Legal
Statement-R, 11x15" and Oficio II
Metric models: Auto, A3, A4-R, A4, A5, B4-R, B5-R,
B5, Folio and 216x340mm
Standard
Sizes 2 Select from the standard
sizes not included in the
Standard Sizes 1. Inch models: A3, A4-R, A4, A5-R, B4-R, B5-R, B5,
Folio, 8K, 16K-R, 16K and 216x340mm
Metric models: Ledger, Letter-R, Letter, Legal,
Statement-R, 11x15", Oficio II, 8K, 16K-R and 16K
Others Select from envelope,
postcard or the custom
sized originals. Hagaki, Oufuku Hagaki
Size Entry Enter the size not
included in the standard
sizes 1 and 2*. Inch models
Horizontal: 2 to 17" (in 0.01" increments), Vertical: 2
to 11.69" (in 0.01" increments)
Metric models
Horizontal: 50 to 432 mm (in 1 mm increments),
Vertical: 50 to 297 mm (in 1 mm increments)