TA Triumph-Adler DC 2435 - Manual (Page 33)

Preparation Before Use
2-9
2
2 Press [Edit Destination], [Register/Edit] of Address
Book, [Add], [Contact], and then [Next].
3 Press [Change] of Address Number.
4 Using [+]/[-] or the numeric keys, enter the custom
address number (0001 to 2,500).
NOTE: The address number is the identification
number for each destination. You can select numbers
available from a total of 2,500 numbers for registration -
2,000 numbers for contact registration and 500
numbers for group registration.
When ‘0000’ is displayed, the number available is
automatically assigned.
5 Press [OK].
6 Press [Change] of Name.
7 Enter the destination name to be displayed on the
Address Book, and press [OK]. Up to 32 characters
can be entered.
NOTE: For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
8 Press [i-FAX].
9 Press [Change] of i-FAX Address.
10 Enter the destination address and press [OK]. Up
to 128 characters can be entered.
NOTE: For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
11 Press [ ] of Mode and select Simple or Full.
Address:
Change
Register
Address Number
Name
0033
Back Cancel
Name Mike
E-mail SMB FTP FAX i-FAX
Status 10/10/2010 10:10
:
Change :
i-FAX Address
Simple
Address:
Name E-mail SMB FTP FAX i-FAX
10/10/2010 Status
Cancel Register Back
Change
Change
Mode
Resolution
Compression
Paper Size
:
:
:
:
200x200dpi
MH
A4/Letter
Transmission
mode
Description
Simple mode Transmission confirmation is not sent to the
destination machine.
Full mode Transmission confirmation is sent to the
destination machine.