TA Triumph-Adler DC 2435 - Manual (Page 32)

Preparation Before Use
2-8
19 If necessary, press [TX Start Speed] and [ECM] to
change the settings. Press [Change] of each key to
change the settings, and press [OK].
20 Check if each item has been entered correctly.
21 Check if the destination has been set correctly, and
press [Register]. The destination is added to the
Address Book.
22 The one-touch key registration confirmation screen
appears. Select [Yes] or [No].
If you selected [Yes], the one-touch key registration
screen appears. Go to the next step.
If you selected [No], registration ends.
23 Select the One-touch key number to which to
register the destination, and Press [Next].
24 Select the destination to which to register, and
Press [Next].
The destination details can be changed by
selecting the destination and pressing [Detail].
25 Press [Change] for [Display Name] and
[Destination] to change the settings as needed.
26 Press [Register].
If the one-touch key has already been registered,
the overwrite registration confirmation screen
appears. Press [Yes] or [No].
Contact Registration (i-FAX)
Up to 2,000 contacts can be registered. Contact name, i-FAX address, transmission mode and the conditions
for the destination machine can be registered for each contact.
1 Press the System Menu key.
Key Description
TX Start Speed To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) prevents distortion
of the fax image by automatically resending any
parts of the data that were not correctly sent due
to the effects of noise on the telephone line
during transmission. To change the ECM
communication setting, press this key.