TA Triumph-Adler DC 2435 - Manual (Page 175)

Setup and Registration
6-27
6
Changing and Deleting Permit ID No.
1 Follow steps 1 to 2 of Registering Permit ID No. on
page 6-26.
2 Select the Permit ID No. to be changed or deleted.
To change Permit ID No., go to step 3, and to delete
Permit ID No., go to step 6.
3 Press [Detail].
4 Use [+]/[-] or the numeric keys to reenter Permit ID
No. (0000 to 9999)
NOTE: Press the Clear key to display the previous
number.
5 Press [OK]. When the change confirmation screen
appears, press [Yes].
Go to step 7.
6 Press [Delete]. When the deletion confirmation
screen appears, press [Yes].
7 To change and delete other Permit ID numbers,
repeat step 2 to 6.
8 Press [Close].
Setting Send Restriction
Restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and Permit
ID No. as well as the ones registered in the Address Book. To change the sending restriction, follow the steps
below.
1 Press the System Menu key.
2 Press [FAX], [Next] of TX/RX Restriction, and then
[Change] of TX Restriction.
FAX - Permit ID List
FAX ID
Register an ID from which faxes will be accepted.
(Up to 25 IDs can be registered.)
Add
Detail Delete
12345678
Close
1/1
10/10/2010 10:10 Status
Status
FAX - Permit ID
Add or edit a Permit ID for transmissions.
Use [-]/[+] or the numeric keys to enter a number.
Cancel OK
10/10/2010 10:10
(0000 - 9999)