TA Triumph-Adler DC 2435 - Manual (Page 151)

Setup and Registration
6-3
6
Selection of Transmit Terminal Identification (TTI)
The transmit terminal identification (TTI) is the information about the machine (transmit terminal) to be printed
out on the fax on the receiving system. The information includes transmission date and time, the number of
transmission pages, and the fax number. This machine enables the user to select if the TTI is printed out on the
fax on the receiving system. Regarding the location of the information to be printed, you can select inside or
outside of the page image being sent.
NOTE: You can specify the same TTI for FAX and Internet FAX (i-FAX) transmissions.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting is enabled and an Account ID is entered when a fax is sent, you can enable a setting to have the
Account Name or Local FAX Name, whichever was selected, be printed. To enable this function, refer to Setting
the TTI information on page 6-4.)
1 Press the System Menu key.
2 Press [FAX], [Next] of Transmission, [Next] of Basic
and then press [Change] of TTI.
3 Press the location for printing the information on
the fax. If you don’t want to print, press [Off].
4 Press [OK].
FAX - TTI
Cancel OK
Attach TTI (Transmit Terminal Identification)
in transmitted documents.
Outside Off
10/10/2010 10:10 Status
Inside