TA Triumph-Adler DC 2435 - Manual (Page 46)

FAX Operation (Basic)
3-6
Placing Originals
Place the originals on the glass surface or in the
optional document processor. Refer to the
machine’s Operation Guide for placing originals.
Dial the Receiving System
1 Press [FAX No. Entry].
NOTE: When you press the numeric keys to enter
numbers, the screen changes to the entry screen
for the fax number (the screen shown in the next
step).
2 Enter the fax number of the receiving system using
the numeric keys.
• If Entry Check for New Destination is Off, press
[OK] to complete entering the number.
• If Entry Check for New Destination is On, press
[OK] and you are prompted to confirm the FAX
number is correct. Re-enter the same FAX number
and press [OK] to complete the entry.
For details, refer to Entry Check for New
Destination in the machine’s Operation Guide.
To continue entering a new number, press [FAX No.
Entry] and repeat the above procedure.
To correct the FAX number, press [Edit].
Up to 64 digits can be entered as the fax number of
the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on the
touch panel, and delete the digits one by one before
Status 10/10/2010 10:10
ABCD [email protected]
Address
Book
FAX No.
Entry
No.
1/100
AAA BBB CCC DDD
FFF GGG HHH III JJJ
0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
Check
Destinations
Destination
Pause Backspace
EEE
Space
Detail Delete Recall Chain Direct On Hook
Org./Sending
Data Format
Quick Setup Destination Image Quality Advanced
Setup
Program
Enter Destination.