TA Triumph-Adler DC 2435 - Manual (Page 76)

FAX Operation (Advanced)
4-8
For details, refer to Entry Check for New
Destination in the machine’s Operation Guide.
To continue entering a new address, press [i-FAX
Address Entry] and repeat the above procedure.
To correct the i-FAX number, press [Detail/Edit].
3 After entering all the destinations, press [OK].
Select the destination from the Address Book
1 Press [Address Book].
2 Select the check boxes beside the
destinations to select from the list.
To use an LDAP address book, select [Ext
Address Book] in [Destination].
3 Press [OK].
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary
destinations are registered.
NOTE: For details of the Address Book, refer to
Selecting a Destination from the Address Book on
page 3-16. For details of the One-touch keys, refer to
Using One-touch Keys on page 2-14.
You can select destinations using a combination of
direct entry, the Address Book and One-touch keys.
4 After selecting all the destinations, press the Start
key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details, refer
to Confirmation Screen of Destinations on page 5-12.