TA Triumph-Adler DC 2435 - Manual (Page 129)

FAX Operation (Advanced)
4-61
4
Communication modes subject to job accounting
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling reception
• Network FAX transmission*
• i-FAX Transmission
• Transmission from the document box
* Destinations include FAX and i-FAX destinations.
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following
operations.
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Output from FAX Box
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Network FAX transmission*
• i-FAX Transmission
• Transmission from the document box
* Destinations include FAX and i-FAX destinations.
IMPORTANT: You can use ‘Make a call’, ‘Checking FAX Job History’ and ‘Communication Control Report
Output’ functions without entering an Account ID or Administrator No.
When job accounting has been enabled, batch transmission function works only for communication to be
performed for the same Account ID. The communication to be performed with a different Account ID is not
conducted as a batch transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting is enabled and an Account ID is entered when a fax is sent, you can enable a setting to have the
Account Name or Local FAX Name, whichever was selected, be printed. To enable this function, refer to Setting
the TTI information on page 6-4.)