TA Triumph-Adler DC 2435 - Manual (Page 115)

FAX Operation (Advanced)
4-47
4
Sub Address Reception
To perform sub-address reception, you must inform the sending party of the machine's sub-address and
password prior to transmission.
When sub-address reception is performed, the functions below can be used.
• Printing/Sending Received Faxes by Requirements (Memory Forwarding) on page 4-18
• Sub address confidential delivery on page 4-19
• Sub address relay broadcast communication on page 4-19
• Sub Address Bulletin Board Communication on page 4-49
IMPORTANT: To use sub-address reception functions, settings must be configured. To configure the settings,
refer to Printing/Sending Received Faxes by Requirements (Memory Forwarding) on page 4-18 or Using Polling
Reception with Sub Addresses on page 4-55.
Program Dial
You can register transmission requirements such as the other party to which you send originals and
transmission time as a program. After registration, you can recall transmission requirements only by pressing
the program number. Also, you can assign names to programs to make recalling programs easier and more
convenient.
NOTE: The copy function can be also registered to the program. Up to 50 programs including copying and
sending functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
1 Transmission requirements have been registered,
press the Program key.
2 Press [Register].
3 Press the program number to be registered (1 to
50).
NOTE: When selecting a program number that has
been registered, you can replace the currently set
function with the function represented by the program
number.
4 Enter the program name, and press [Register]. The
program is registered.
NOTE: For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.