TA Triumph-Adler DC 2435 - Manual (Page 85)

FAX Operation (Advanced)
4-17
4
Using the Remote Switch Dial
To start fax reception by operation from the connected telephone set, use the following operation.
1 The connected telephone set makes a ringing tone.
2 Lift the handset of the telephone.
3 When you hear the fax tone from the handset, enter
the two-digit remote switch dial number using the
dial button on the telephone set.
NOTE: The remote switch dial is set to 55 at the
factory.
When entering the 2-digit remote switch dial number,
press the numbers slowly. If the numbers are pressed
too quickly, the line may not switch to the machine.
4 The telephone line switches to the machine, and
reception starts.