TA Triumph-Adler DC 2435 - Manual (Page 80)

FAX Operation (Advanced)
4-12
• If Entry Check for New Destination is Off, press
[OK] to complete entering the number.
• If Entry Check for New Destination is On, press
[OK] and you are prompted to confirm the FAX
number is correct. Re-enter the same FAX number
and press [OK] to complete the entry.
• When [New Destination Entry] is set to [Prohibit], the
numeric keys cannot be used to enter a fax number.
For details, refer to Sending faxed documents to a
specified additional address on page 4-63.
For details, refer to Entry Check for New
Destination in the machine’s Operation Guide.
To continue entering a new number, press [FAX No.
Entry] and repeat the above procedure.
To correct the FAX number, press [Edit], and then
re-enter the chain number.
Select fax number from the Address Book
1 Press [Address Book].
2 Select the destination from the list. You can
select several destinations.
3 Press [OK]. The chain number ‘010’ is
automatically added to all the destinations.
Select fax number from One-touch key
Select the destination from One-touch keys. The
chain number ‘010’ is automatically added to the
destinations.
To enter another fax number with a one-touch key,
re-enter the chain number.
6 Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
refer to Confirmation Screen of Destinations on
page 5-12.