KACO Powador XP100-HV - Manual (Page 79)

Operating Instructions Powador XP100-HV Page 79
P a r a m e t e r
• Grid Under Voltage Levels
- Grid Under Voltage Level 1 – Transfer to FRT mode.
- Grid Under Voltage Level 2 – Inverter stops its operation with ‘Grid Under Voltage Level 2 Fault’ when
the grid voltage below ‘Grid Under Voltage Level 2’ sustains over “Grid Under Voltage Trip Time 2”.
- Grid Under Voltage Trip Time 1 – Permissible grid voltage under ‘Grid Under Voltage Level 1’ time.
- Grid Under Voltage Trip Time 2 – Permissible grid voltage under ‘Grid Under Voltage Level 2’ time.
Figure 67: FRT Parameters
8.7.5 Q(V) Control
Figure 68: Grid Voltage Control during Q(V) Control Enable