KACO Powador XP100-HV - Manual (Page 5)

Operating Instructions Powador XP100-HV Page 5
G e n e r a l N o t e s
1.1.4 Symbols used in this document
General danger symbol Risk of fi re or explosion
High voltage Risk of burns
1.1.5 Description of actions
Action
 Perform this action
 (Possibly additional actions)
The result of your action(s)
1.1.6 Abbreviations
MMI User interface
(Man Machine Interface)
MPP Point of the current-voltage diagram of a solar
cell at which the maximum amount of power
can be drawn
IGBT Semiconductor device
(Insulated Gate Bipolar Transistor)
MPPT The MPP tracker adjusts the voltage to the
MPP value.
DSP Digital Signal Processor PEBB Power electronics module
(Power Electronics Building Block)
FPGA Integrated circuit for digital technology
(Field Programmable Gate Array)
PSIM Master control for the interfaces in the unit
(PEBB Signal Interface Master)
SELV Safety Extra-Low Voltage NVSRAM Permanent memory in which fi xed parameters
are stored (Non-Volatile Static Random Access
Memory)
AS-i 3 Analog Signal Interface 3
1.2 Name plate
The name plate is located on the inside of the left door of the two housing components.