KACO Powador XP100-HV - Manual (Page 28)

Page 28 Operating Instructions Powador XP100-HV
I n s t a l l a t i o n / S t a r t - u p
SAFE
Remove the SD card
“Data was saved to the SD card” icon
You can remove the SD card. The icon is displayed for one minute.
 Open the inverter.
 Remove the SD card by gently pressing and then releasing it. The SD card will pop out slightly.
You can now remove it.
 Close the inverter and start it up.
NOTE
Do not remove the SD card until the SAFE icon is displayed so that it will be detected by the MMI
when you reinsert it.
5.8.2 Status display for speaker
Audible signal when you press the LCD screen
No signal
5.8.3 Using the main menu
Press button Result/Function
 PV generator The measured values for the PV generator are displayed (fi gure 18)
 Inverter The measured values for the inverter are displayed (fi gure 19)
 Power grid (AC connection) The measured values for the power grid are displayed (fi gure 20)
 ON Switches on the inverter
 OFF Switches off the inverter
 Speaker Switches speaker on/off