KACO Powador XP100-HV - Manual (Page 19)

Operating Instructions Powador XP100-HV Page 19
I n s t a l l a t i o n / S t a r t - u p
5.3.4 Connecting the external voltage supply
The external voltage supply supplies the MMI, fans, measurement equipment, etc. The inverter will not work
without this connection.
Connect the external voltage supply (fi gure 10)
The connection for the additional power supply is located in the right side of the inverter housing.
 Connect the additional power supply to the terminals marked “TO” using single-phase 230 V.
Figure 10: Connecting the external voltage supply
Key
1 230 V L 3 TO (connection for auxiliary power supply)
2 230 V N 4 User interface
1, 2
3
4