Yaskawa Varispeed 626M5 - Manual (Page 259)

14.3 Options and Peripheral Units
14 -55
J
Digital Operator Appearance
The appearance of the Digital Operator is shown in the following diagram.
LOCAL
REMOTE
DIGITAL OPERATOR
JVOP-132
DSPL
DATA
ENTER
JOG
FWD
REV
RESET
RUN STOP
DRIVE FWD REV REMOTE
REF SEQ
DRIVE
PRGM
JOG
DRIVE FWD REV REMOTE
REF SEQ
JVOP-132
Mode indicators
Display panel
Keypad (display
selection keys, etc.)
Fig 14.20 Digital Operator Display Panel and Operation Keys
J
Mounting the Digital Operator to the Panel
The following three methods can be used to mount the Digital Operator to a control panel. Mount the Digi-
tal Operator in accordance with the application.
Table 14.24 Mounting Method Features
Item Method 1 Method 2 *1 Method 3 *1 Remarks
Ease of mounting
(Extent of panel
Excellent Good Some difficulty ---
(Extent of panel
manipulation) 3 screw holes 3 screw holes 5 screw holes
Ease of removal
(Removal from the
Some difficulty Some difficulty Excellent Method 3 enables
the Digital Operator (Removal from the
panel) Fixed permanently Fixed permanently Can be mounted and
removed freely
the Digital Operator
to be mounted and
removed freely.
Applicable loca-
tion
Some difficulty Good Some difficulty ---
tion
(Dusty locations,
etc.)
--- *2 ---
Additional parts
code number
--- DACT32183-AD DACT32183-BD ---
* 1. Mounting methods 2 and 3 require additional parts such as metal plates or resin.
* 2. If mounting the Digital Operator in a dusty location or similar, mount packaging or another
buffer between the panel and the Digital Operator.
14