Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 84)

1 Ladder Program Instructions
1.4.5 DIRECT OUTPUT STRING Instruction (OUTS)
1-74
1.4.5 DIRECT OUTPUT STRING Instruction (OUTS)
„ Outline
The OUTS instruction continuously performs direct output to a single module according to
the contents of a previously-set parameter table. OUTS can only be used for LIO modules.
„ Format
„ Parameter
* Possible to omit.
* Method of setting RSSEL and N (number of words) is the same as for INS.
Parameter Name Setting
Parameter • Register address (except for # and C registers)
• Register address with subscript
[ Status ] * • Any bit type register (except for # and C registers)
• Any bit type register with subscript
Symbol: OUTS
Full Name: Direct Output String
Category: CONTROL
Icon:
Table 1.11 OUTS Instruction Parameter/Data
ADR Type Symbol Name Specifications Input or
Output
0 W RSSEL Module designation 1
Designation of module for performing output
∗ IN
1 W MDSEL Module designation 2 IN
2 W STS Status Output of a bit equivalence of the status for each
word output OUT
3 W N Number of words Designation of number of words output continuously IN
4 W OD1 Output data 1 Setting output data IN
•
•
• •
•
• •
•
• •
•
• •
•
•
N+3 W ODN Output data N IN