Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 60)

1 Ladder Program Instructions
1.2.20 PARITY CONVERSION Instruction (PARITY)
1-50
1.2.20 PARITY CONVERSION Instruction (PARITY)
„ Outline
The PARITY instruction counts the number of bits in the Source that are set to ON (or 1) and
the result is stored in the Dest.
„ Format
„ Parameter
„ Program Example
Integer Type Data
Double-length Integer Type Data
Parameter Name Setting
Source • Any integer type and double-length integer type register
• Any integer type and double-length integer type register with
subscript
• Subscript register
Dest • Any integer type and double-length integer type register
(except for # and C registers)
• Any integer type and double-length integer type register with
subscript (except for # and C registers)
• Subscript register
Symbol: PARITY
Full Name: Count ON Bit
Category: MATH
Icon: