Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 196)

2.1 Message Functions
2-3
2
„ Parameter
„ Parameter Details
They adhere to contents-functions and so on and are collected into parameter numerical
order.
Table 2.1 is Parameter List.
I/O
Definition
Parameter
Name
I/O
Designation
Setting
Input Execute B-VAL Send message instruction
Abort B-VAL Send message forced interruption instruction
Dev-Typ I-REG Type of transmission device
CPU module = 8 215IF = 1 217IF = 5
218IF = 6 218-02 = 16 SVB-01 = 11
Pro-Typ I-REG Transmission protocol
MEMOBUS = 1
non-procedural = 2
Cir-No I-REG Line No.
CPU module = 1, 2 215IF = 1 to 8 217IF = 1 to 24
218IF = 1 to 8 SVB-01 = 1 to 16
Ch-No I-REG Transmission buffer channel No.
CPU module = 1, 2 215IF = 1 to 13 217IF = 1
218IF = 1 to 10 SVB-01 = 1 to 8
Param Address in-
put Head address of set data (MW, DW, #W)
Output Busy B-VAL Message is being sent.
Complete B-VAL The sending of the message has been completed.
Error B-VAL Occurrence of error
Table 2.1 Parameter List
Parameter No. IN/OUT Contents
MEMOBUS Non-procedural
PARAM 00 OUT Process result Process result
PARAM 01 OUT Status Status
PARAM 02 IN Called station number Called station number
PARAM 03 SYS System reserved System reserved
PARAM 04 IN Function code
PARAM 05 IN Data address Data address
PARAM 06 IN Data size Data size
PARAM 07 IN Called CPU number Called CPU number
PARAM 08 IN Coil offset
PARAM 09 IN Input relay offset
PARAM 10 IN Input register offset
PARAM 11 IN Holding register offset Register offset
PARAM 12 SYS For system use For system use