Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 16)

1 Ladder Program Instructions
1.1.3 10-MS ON-DELAY TIMER Instruction (TON [10ms])
1-6
1.1.3 10-MS ON-DELAY TIMER Instruction (TON [10ms])
„ Outline
The TON [10ms] is executed while the immediately-preceding value of the bit input is ON.
The value of the bit output is set to ON when the timer value reaches the set value. The
timer stops when the immediately-preceding value of the bit input is set to OFF during tim-
ing. When the bit input is set to ON again, timing restarts from the beginning (0). A value
equal to the actual timed time (10 ms Unit) is stored in the timer value register.
The maximum error of the count is 10 ms or less.
„ Format
„ Parameter
Parameter Name Setting
Set (set value) • Any integer type register
• Any integer type register with subscript (0 to 65535: in 0.01 sec
unit)
• Constant
Count (timer value) • Any integer type register (except for # and C registers)
• Any integer type register with subscript (except for # and C reg-
isters)
Symbol: TON [10ms]
Full Name: On-Delay Timer [10ms]
Category: RELAY
Icon: