Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 202)

2.1 Message Functions
2-9
2
„ Data Size (PARAM06)
Set the size (in number of bits or number of words) of the data that is requested for readout
or write-in. The setting range will differ according to the transmission module and the func-
tion code to be used. Refer to Table 2.6.
Called CPU Number (PARAM07)
PARAM07 sets the called CPU number.
Set the called CPU number to 1 if the called device is an MP2000 Series Machine Control-
ler.
If the called device is a Yaskawa Controller, but not in the MP2000 Series and it consists of
more than one CPU Module, set the destination CPU number.
In all other cases, set 0.
Table 2.6 Serial Data Size Setting Range
Function Code Data Address Setting Range
215IF/218IF CPU Module/
217IF/SVB-01
00H Unused Ineffective
01H Read coil status 1 to 2000 (1 to 07D0H) bits
02H Read input relay status 1 to 2000 (1 to 07D0H) bits
03H Read contents of holding register 1 to 125 (1 to 007DH) words
04H Read contents of input register 1 to 125 (1 to 007DH) words
05H Change status of single coil Ineffective
06H Write into a single holding register Ineffective
07H1 Unused Ineffective
08H Loop-back test Ineffective
09H Read contents of holding register
(expanded) 1 to 508
(1 to 01FCH)
words 1 to 252
(1 to 00FCH)
words
0AH Read contents of input register
(expanded) 1 to 508
(1 to 01FCH)
words 1 to 252
(1 to 00FCH)
words
0BH Write into holding register
(expanded) 1 to 507
(1 to 01FBH)
words 1 to 252
(1 to 00FBH)
words
0CH Unused Ineffective
0DH Discontinuous readout of holding
register (expanded) 1 to 508
(1 to 01FCH)
words 1 to 252
(1 to 00FCH)
words
0EH Discontinuous write into holding
register (expanded) 1 to 254
(1 to 00FEH)
words 1 to 126
(1 to 007EH)
words
0FH Change status of a multiple coil 1 to 800 (1 to 0320H) bits
10H Write into a plurality of holding reg-
ister 1 to 100 (1 to 0064H) words