Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 207)

2 Standard System Function
2.1.2 Receive Message Function (MSG-RCV)
2-14
„ Parameter
„ Parameter Details
They adhere to contents-functions and so on and are collected into parameter numerical
order.
Table 2.7 is Parameter List.
I/O
Definition
Parameter
Name
I/O
Designation
Setting
Input Execute B-VAL Receive message instruction
Abort B-VAL Receive message forced interruption instruction
Dev-Typ I-REG Type of transmission device
CPU module = 8 215IF = 1 217IF = 5
218IF = 6 218-02 = 16 SVB-01 = 11
Pro-Typ I-REG Transmission protocol (Set up of RTU and ASCII is module configu-
ration definition.)
MEMOBUS = 1
non-procedural = 2
Cir-No I-REG Line No.
CPU module = 1 215IF = 1 to 8 217IF = 1 to 24
218IF = 1 to 8 SVB-01 = 1 to 16
Ch-No I-REG Transmission buffer channel No.
CPU module = 1 215IF = 1 to 13 217IF = 1
218IF = 1 to 10 SVB-01 = 1 to 8
Param Address in-
put Head address of set data (MW, DW, #W)
Output Busy B-VAL Message is being received.
Complete B-VAL The receiving of the message has been completed.
Error B-VAL Occurrence of error
Table 2.7 Parameter List
Parameter No. IN/OUT Contents
MEMOBUS Non-procedural
PARAM 00 OUT Process result Process result
PARAM 01 OUT Status Status
PARAM 02 OUT
IN
*
Called station number Called station number
PARAM 03 SYS System reserved System reserved
PARAM 04 OUT Function code
PARAM 05 OUT Data address Data address
PARAM 06 OUT Data size Data size
PARAM 07 OUT Called CPU number Called CPU number
PARAM 08 IN Coil offset
PARAM 09 IN Input relay offset
PARAM 10 IN Input register offset