Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 56)

1 Ladder Program Instructions
1.2.18 BINARY CONVERSION Instruction (BIN)
1-46
„ Program Example
Integer Type Data
Double-length Integer Type Data
Real Number Type Data
1.2.18 BINARY CONVERSION Instruction (BIN)
„ Outline
The BIN instruction converts a binary coded decimal (BCD) value in the Source and into a
binary value (binary conversion) and the result is stored in the Dest. If the 4-digit BCD
value in the integer is abcd, the output value (Dest) of the BIN instruction can be determined
by the following formula:
Dest
= (a × 1000) + (b × 100) + (c × 10) + d
Although the above formula is applicable even if the value in the Source is not in BCD nota-
tion (e.g. 123FH), correct results are obtained in such cases.