Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 14)

1 Ladder Program Instructions
1.1.1 N.O. Contact Instruction (NOC)
1-4
1.1 Relay Circuit Instructions
1.1.1 N.O. Contact Instruction (NOC)
„ Outline
The NOC sets the value of the bit output to ON if the value of the referenced register is 1
(ON), and to OFF is the value of the referenced register is 0 (OFF).
„ Format
„ Parameter
„ Program Example
When MW000100 becomes ON, MB000101 becomes ON.
Parameter Name Setting
Relay No. • Any bit type register
• Any bit type register with subscript
Symbol: NOC
Full Name: NO Contact
Category: RELAY
Icon:
MB000100
ON
OFF
MB000101
ON
OFF