Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 215)

2 Standard System Function
2.2.1 Trace Function (TRACE)
2-22
2.2 Trace Functions
2.2.1 Trace Function (TRACE)
„ Outline
Performs execution control of the traces of the trace data designated by the trace group No.
The trace is defined as "Data Trace Definition" screen.
• Tracing is executed when the trace execution command (Execute) is set to ON.
• The trace counter is reset when the trace reset command (Reset) is set to ON.
The trace end (Trc-End) output is also reset at this time.
• The trace end (Trc-End) output is set to ON when the trace execution count becomes
equal to the set count (set as Trace Definition).
„ Format
„ Parameter
I/O
Definition
Parameter
Name
I/O
Designation
Setting
Input Execute B-VAL Trace execution command
Rese t B-VAL Trace reset command
Group-No I-REG Designation of the trace group
Output Trc-End B-VAL End of Trace
Error B-VAL Occurrence of error
Status I-REG Trace execution status
Symbol: TRACE
Full Name: Trace
Category: SYSTEM
Icon: