Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 228)

2.3 Inverter Functions
2-35
2
„ Parameter
I/O
Definition
Parameter
Name
I/O
Designation
Setting
Input Execute B-VAL Inverter constant write instruction
Abort B-VAL Inverter constant write forced interruption instruction
Dev-Typ I-REG Type of transmission device
215IF = 1 MP930 = 4 SVB-01 = 11
Cir-No I-REG Line No.
215IF = 1, 2 MP930 = 1 SVB-01 = 1 to 16
St-No I-REG Slave station No.
215IF = 1 to 64 MP930 = 1 to 14 SVB-01 = 1 to 14
Ch-No I-REG Transmission buffer channel No.
215IF = 1 to 3 MP930 = 1 SVB-01 = 1 to 8
Cns-Typ I-REG Type of inverter constant
0
= direct designation of reference No. 1 = An, 2 = Bn, 3 = Cn,
4 = Dn, 5 = En, 6 = Fn, 7 = Hn, 8 = Ln, 9 = On, 10 = Tn
Cns-No I-REG Inverter constant No. (1 to 99)
The upper limit will differ according to the type of inverter.
If Cns-Typ
= 0, designate the reference No.
Cns-Size I-REG Number of inverter constants (number of data to be written)1 to 100
Dat-Adr Address in-
put Register address of set data (address of MW, DW, or #W)
Output Busy B-VAL Inverter constants are being written in.
Complete B-VAL The write-in of inverter constants has been completed.
Error B-VAL Occurrence of error
Status I-REG Inverter constant write execution status