Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 21)

1.1 Relay Circuit Instructions
1-11
1
„ Program Example
MW00011 works as timer count register. Thus, it is essential that there is no overlap. Set an unused
register.
1.1.7 RISING PULSE Instruction (ON-PLS)
„ Outline
The ON-PLS sets the value of the bit input to ON during one scan when the immediately-
preceding value of the bit output changes from OFF to ON. The designated register is used
to store the previous value of the bit output.
„ Format
„ Parameter
0
500
ON
ON
OFF
OFF
MB000100
MB000101
MB000011
500s-Ts
(Ts = Scan set value)
IMPORTANT
Parameter Name Setting
Register No. • Any bit type register (except for # and C register)
• Any bit type register with subscript (except for # and C regis-
ters)
Symbol: ON-PLS
Full Name: Rise Pulse
Category: RELAY
Icon: