Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 199)

2 Standard System Function
2.1.1 Send Message Function (MSG-SND)
2-6
• PARAMETER
One of the error codes of Table 2.3 is indicated if RESULT = 4 (FMT_NG). Otherwise,
this indicates the address of the called station.
• REQUEST
1 = Request
0 = Completion of receipt report
Called Station Number (PARAM02)
Serial
1 to 254: Message is sent to the station of designated device address.
Table 2.3 Error Codes List
Code Error
00 No errors
01 Station address is out of range.
02 Monitored MEMOBUS response receiving time error
03 Resending count setting error
04 Cyclic area setting error
05 Message signal CPU No. error
06 Message signal register No. error
07 Message signal word count error