HEIDENHAIN TNC 426 (280 476) - Manual (Page 71)

44 4 Programming: Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.3 Standar
d
File Manag
e
ment
Data transfer to or from an external data
medium
Call the file manager.
Activate data transfer: Press the EXT soft key. In the
left half of the screen
(1) the TNC shows all files
saved on its hard disk. In the right half of the screen
(2) it shows all files saved on the external data
medium.
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window
Moves the highlight from the left to the right window,
and vice versa.
If you wish to copy from the TNC to the external data medium, move
the highlight in the left window to the file to be transferred.
If you wish to copy from the external data medium to the TNC, move
the highlight in the right window to the file to be transferred.
Before you can transfer data to an external data medium,
you must setup the data interface(see “Setting the Data
Interfaces” on page 422).
Tagging functions Soft key
Tag a single file
Tag all files
Untag a single file
Untag all files
Copy all tagged files
1 2