HEIDENHAIN TNC 426 (280 476) - Manual (Page 482)

HEIDENHAIN TNC 426, TNC 430 455
13.1 Gener
a
l User P
a
ra
met
e
rs
Configure tool tables MP7260
Inactive: 0
Number of tools generated by the TNC when a new tool table is opened:
1 to 254
If you require more than 254 tools, you can expand the tool table with the function APPEND N
LINES, see “Tool Data,” page 99
Configure pocket
tables MP7261.0 (magazine 1)
MP7261.1 (magazine 2)
MP7261.2 (magazine 3)
MP7261.3 (magazine 4)
Inactive: 0
Number of pockets in the tool magazine: 1 to 254
If the value 0 is entered in MP 7261.1 to MP7261.3, then only one tool magazine will be used.
Index tool numbers in
order to be able to
assign different
compensation data to
one tool number MP7262
Do not index: 0
Number of permissible indices: 1 to 9
Soft key for pocket
tables MP7263
Show the POCKET TABLE soft key in the tool table: 0
Do not show the POCKET TABLE soft key in the tool table: 1
Configure tool table
(To omit from the
table: enter 0); Column
number in the tool
table for MP7266.0
Tool name – NAME: 0 to 31; column width: 16 characters
MP7266.1
Tool length – L: 0 to 31; column width: 11 characters
MP7266.2
Tool radius – R: 0 to 31; column width: 11 characters
MP7266.3
Tool radius 2 – R2: 0 to 31; column width: 11 characters
MP7266.4
Oversize length – DL: 0 to 31; column width: 8 characters
MP7266.5
Oversize radius – DR: 0 to 31; column width: 8 characters
MP7266.6
Oversize radius 2 – DR2: 0 to 31; column width: 8 characters
MP7266.7
Tool locked – TL: 0 to 31; column width: 2 characters
MP7266.8
Replacement tool – RT: 0 to 31; column width: 3 characters
MP7266.9
Maximum tool life – TIME1: 0 to 31; column width: 5 characters
MP7266.10
Maximum tool life for TOOL CALL – TIME2: 0 to 31; column width: 5 characters
MP7266.11
Current tool life – CUR. TIME: 0 to 31; column width: 8 characters
TNC displays, TNC editor