2 t ool d a ta – HEIDENHAIN TNC 426 (280 476) User Manual
Page 131
104
5 Programming: Tools
5.2 T
ool D
a
ta
To open any other tool table:
7
7
7
7
Select the Programming and Editing mode of operation.
7
7
7
7
Call the file manager.
7
7
7
7
To select the file type, press the SELECT TYPE soft
key.
7
7
7
7
To show type .T files, press the SHOW .T soft key.
7
7
7
7
Select a file or enter a new file name. Conclude your
entry with the ENT key SELECT soft key.
When you have opened the tool table, you can edit the tool data by
moving the cursor to the desired position in the table with the arrow
keys or the soft keys. You can overwrite the stored values, or enter
new values at any position. The available editing functions are
illustrated in the table below.
If the TNC cannot show all positions in the tool table in one screen
page, the highlight bar at the top of the table will display the symbol
“>>” or “<<”.
Leaving the tool table
7
7
7
7
Call the file manager and select a file of a different type, e.g. a part
program.
Editing functions for tool tables
Soft key
Select beginning of table
Select end of table
Select previous page in table
Select next page in table
Look for the tool name in the table
Show tool information in columns or show all
information on one tool on one screen page
Move to beginning of line
Move to end of line
Copy the highlighted field
Insert the copied field