HEIDENHAIN TNC 306 Service Manual - Manual (Page 66)

SERVICE MANUAL TNC 306/360
Page 59
HEIDENHAIN Service
15. External Data Transfer
15.1 External Data Input
Preparation:
- Connect the external data carrier (ME, FE or peripheral unit e.g. personal computer with
HEIDENHAIN data transfer software) to the TNC.
- Prepare the external data medium for data transfer:
press
STOP
at the FE
- Configure the interface (see section 14.2)
File Overview TNC 306/360
File File Extension on FE
File Extenion on PC with
HEIDENHAIN Data
Transfer Software
PLC-Programs
Machine Parameters
NC-Programs
Central Tool File
Compensation Value List XXX.P
XXX.M
XXX.H
0.H
XXX.S
XXX.PNC
XXX.MNC
XXX.HNC
0.HNC
XXX.SNC
Notes