Connector designation and pin layout, Connectors on the logic unit le 360/c – HEIDENHAIN TNC 306 Service Manual User Manual
Page 19
SERVICE MANUAL TNC 306/360
Page 15
HEIDENHAIN Service
6. Connector Designation and Pin Layout
6.1 Connectors on the LOGIC UNIT LE 360/C
6.1.1 Connector Designation: LOGIC UNIT LE 360/C
Processor board
X1
= nominal value output 1, 2, 3, 4, S
X11 = handwheel HR 130/330
X12 = touch probe system
PLC board
X21 = PLC output
X22 = PLC input
X23 = TNC operating panel (TE)
X24 = power supply 24 V for PLC
X25 = data interface V.24/RS-232-C
X26 = PLC I/O board (PL 400)
X27 = machine operating panel (MB)
Power supply
X31 = power supply 24 V for LE
This manual is related to the following products: