HEIDENHAIN TNC 306 Service Manual - Manual (Page 60)

SERVICE MANUAL TNC 306/360
Page 53
HEIDENHAIN Service
14.2.2 Selecting the Baud Rate
press key function
MOD
activate auxiliary mode "MOD"
or press key repeatedly until the dialog
BAUD-RATE = XXXXX is displayed
...
enter desired Baud rate 1)
transfer entered value
END
exit auxiliary mode "MOD"
1) Possible entry values: 110, 150, 300, 600, 1200, 2400, 4600, 9600, 19200,
38400 Baud
If an incorrect value is entered, the error message
ENTRY VALUE INCORRECT
is displayed.
Note:
Only in the EXT operating mode is it possible to select any Baud rate. In the operating
modes ME and FE, the Baud rates of 2400 and 9600 Baud are preset by the TNC.