Epson 386/25 - Manual (Page 68)

There are two more Setup summary screens you need to check.
To display the next screen, press
PgDn. You see the following:
Real-time clock Time
13:40:38
Date 12-29-1990
coprocessor not installed
Diskette drive Drive A:
1.2
MB
Drive B: None
Speaker Enabled
Initial num lock
Keyboard repeat rate Normal
Serial Primary
Parallel Primary
If you have never set the real-time clock, the entry at the top of
the screen flashes to remind you to set the time and date. See
“Setting the Real-time Clock,” above, for instructions.
To view the last Setup summary screen, press PgDn. You see
your hard disk drive configuration(s):
Hard disk drive
Drive 1: Type 60
Number of cylinders 716
Number of heads 8
Number of sectors 33
Precomp. cylinder None
Landing zone 775
Total capacity (MB) 100
Drive 2: None
Number of cylinders 0
Number of heads 0
Number of sectors 0
Precomp. cylinder 0
Landing zone 0
Total capacity (MB) .0
2-30 Running the Setup Program