Epson 386/25 - Manual (Page 182)

When Setup asks for the name of the drive and directory to
contain the driver files, erase the default name and enter the
directory containing your Wordstar 3.3 program files.
4. Now install the VGAMODE utility. See “VGAMODE
Utility” on page A-57 for instructions.
5. Log onto the Wordstar 3.3 directory on your hard disk.
6. Type the following and press Enter to run WS33INST:
WS33INST
This utility makes the necessary patch to the WS.COM
program file.
7. To rename the WS.COM file to WS132.COM, type the
following and press Enter:
REN WS.COM WS132.COM
8. To rename the WSORIG.COM file to WS.COM, type the
following and press
Enter:
REN WSORIG.COM WS.COM
Running WordStar 3.3
To run WordStar 3.3 with 132 columns, you must specify
132-column text mode prior to starting WordStar by running the
VGAMODE program. Follow these steps:
1. Type the following and press Enter to specify 132-column
text mode:
VGAMODE 132, 25
A-40
Using the VGA Utilities