Epson 386/25 - Manual (Page 57)

4. Using a 24-hour clock, enter the time in the exact format
shown in the box. Type two digits for each part; the Setup
program automatically inserts the colons ( : ). For example,
to set the time to 1:30 p.m., you would type the following:
1 3 3 0 0 0
You can use the backspace key to make corrections. When
the time is correct, press Enter. If you enter an invalid
time-for example, a number greater than 23 for the hours
or greater than 59 for the minutes or seconds-the computer
ignores your entry. Try again.
5. To set or change the date, highlight Date and press
Enter. You see this box:
(“mm” stands for month, “dd” stands for day, and “yyyy”
stands for year.)
6. Enter the date in the exact format shown in the box. Use
two digits for the month and day, and four digits for the
year; the Setup program automatically inserts the hyphens.
For example, to set the date for December 29,1990, you
would type the following:
1 2 2 9 1 9 9 0
You can use the backspace key to make corrections. When
the date is correct, press Enter. If you enter an invalid
date-for example, a number greater than 12 for the month
or greater than the number of days in that month-the
computer ignores your entry. Try again.
7. Press once or twice to return to the main Setup menu.
Running the Setup Program 2-19