Epson 386/25 - Manual (Page 174)

Version 1.1:
❏ 640 x 480, 2-color graphics (SDV480.EGA)
❏ 800 x 600, 2-color graphics (SDV600.EGA)
❏ 1024 x 768, 2-color graphics (SDV768.EGA).
Installing the Drivers
If you have not yet installed Ventura Publisher, begin with
step 1. If you have already installed it, begin with step 2.
1. Install Ventura Publisher following the instructions in your
Ventura documentation. Specify a Hercules driver as the
temporary display driver.
2. Run the VGA Driver Setup program on your Utility 1
diskette to copy the Ventura Publisher 1.0 or 1.1 drivers to
your hard disk. See “Using the VGA Driver Setup Program”
on page A-4 for instructions.
When Setup asks for the name of the drive and directory to
contain the driver files, you can accept the default
pathname or enter a different one.
3. Use the MS-DOS FORMAT command to format a blank
diskette. (See your MS-DOS Reference Manual for
instructions.)
4. Use the MS-DOS COPY command to copy all of the new
driver files from your hard disk to the root directory of the
newly formatted diskette in drive A. The filenames of the
display drivers are listed at the beginning of this section.
5. Log onto drive A.
A-32 Using the VGA Utilities