beautypg.com

Setting the power-on password – Epson 386/25 User Manual

Page 47

background image

Note

4.

After you highlight the appropriate display adapter type,

press

Enter.

The screen displays your new setting.

5. Highlight

* * * SAVE SETTING

* * * and

press

Enter

to return to the main Setup menu.

Setting the Power-on Password

A power-on password is a feature that lets you control who can

access your system. However, you do not need to set a power-on

password to use your computer. If you do not want to set a
password, skip this section.

Once you set a power-on password, you must enter it at the key

prompt ( ) every time you turn on or reset your computer.

If you cannot enter it correctly, the computer does not respond

to your keyboard entries. Therefore, if you set a power-on
password, be sure to remember it or write it down and keep it in

a safe place.

If you want to use your computer as a network server, you can
set your password to operate in network server mode. (See

“Using Your Computer as a Network Server” in Chapter 4 for
more information.)

Running the Setup Program

2-9