Epson 386/25 - Manual (Page 194)

4. Then enter the name of the directory containing the new
display driver files. For example, type the following and press
Enter:
5. Type DD to set the driver filename.
6. Press S to choose a special driver.
7. Then enter the name of the driver file for the resolution
you want to use. (The driver filenames are listed at the
beginning of this section.) For example, to use the
1024 x 768, 16-color graphics driver, type the following and
press Enter:
CHIPS768.DRV
8. Press U to save the new configuration.
9. To exit OrCAD, press Q.
Generic CADD, Version 1.1, Level 3
The following resolutions are available for Generic CADD,
version 1.1, level 3:
800 x 600, 16-color graphics (CHIPS600.VGD)
1024 x 768, 16-color graphics (CHIPS768.VGD).
Installing the Drivers
If you have not already installed Generic CADD, version 1.1,
level 3, on your computer, follow the instructions in your
Generic CADD documentation to install it.
A-52 Using the VGA Utilities