Epson 386/25 - Manual (Page 173)

5. Copy to the GEM_DRIVRPK diskette all the driver files
that you copied to your hard disk in step 2. The filenames of
the drivers are listed at the beginning of this section. Use
the MS-DOS COPY command to copy the files.
6. Remove the GEM_DRIVRPK diskette and insert the
GEM 3.0 System Master Disk in drive A.
7. Log onto drive A, type the following, and press Enter:
GEMSETUP
8. Follow the installation instructions in your GEM
documentation to change the existing configuration. When
you see Choose item to change, select Other
(Driver Pak).
9. The program prompts you to insert the driver pack disk in
drive A. Remove the System Master Disk, insert the
GEM_DRIVRPK diskette and complete the installation.
Ventura Publisher, Versions 1.0 and 1.1
Epson provides drivers for Ventura Publisher, versions 1.0 and
1.1, in the following resolutions:
Version 1.0:
❏ 640
x 480, 2-color graphics (SDV480SYS)
❏ 800 x 600, 2-color graphics (SDV600.SYS)
❏
1024 x 768, 2-color graphics (SDV768.SYS)
Using the VGA Utilities A-31