Exiting the hard disk format menu – Epson 386/25 User Manual
Page 247
If the program finds errors, the screen displays a table of the
tracks that gave errors, similar to the one the Destructive surface
analysis displays.
After the status reports, you see this message:
Press
ENTER
to
return
to the menu.
Check the information displayed. Then press
Enter
to return to
the Hard Disk Format Menu.
Exiting the Hard Disk Format Menu
To leave the Hard Disk Format Menu, select 0
-Exit . The
screen displays the Operation Menu.
If you formatted the hard disk with option 1 or 2, you must now
install MS-DOS (or another operating system) on the hard disk
to prepare it for use. Remove the Reference diskette from
drive A and then follow the instructions in your MS-DOS
Installation Guide. The installation process automatically
partitions and formats the hard disk.
If you only ran the Non-destructive surface analysis, remove the
Reference diskette from drive A and press the RESET button to
load MS-DOS.
Physically Formatting
a Hard Disk
C-13