The computer won’t start – Epson 386/25 User Manual
Page 253
Power-on diagnostics error codes and messages (continued)
Error code
Message
Auxiliary device(s)
8601
Auxiliary device failure
8602
Auxiliary device failure
8603
Auxiliary device failure
Action
See “Mouse
Problems”
The Computer Won’t Start
If your computer does not start when you turn on the power,
check the following:
1.
Is the power light on? If not, remove any diskettes and turn
off the power. Check that the power cord is securely
connected to both the AC inlet on the back panel and an
electrical outlet. Replace the Startup or Reference diskette,
if necessary, and turn on the computer again.
Caution
If you turn off the computer for any reason, always wait at
least five seconds before turning it back on, You can
damage the computer if you turn it off and on rapidly.
2.
If the power light still does not come on, check the
electrical outlet for
power. Turn off
your
computer
and
unplug the power cord from the wall outlet. Plug a lamp into
the outlet, and turn it on to see if the outlet supplies power.
3.
If the electrical outlet is working and all the connections are
secure but your computer still won’t start, call your dealer.
Note
If the computer starts but you can’t see anything on the
screen, see “Monitor Problems,” below.
Troubleshooting
D-5