K e y ) – Epson 386/25 User Manual
Page 251
If the error is not serious, you see this prompt:
( R e s u m e = “ F l ”
k e y )
Write down the error message and code number, and then press
F1
to continue. Give the error message and code number to
your dealer when reporting a problem.
If the error is serious, the computer cancels further checking and
halts system initialization. The error message remains on the
screen and the computer locks up. If this happens, contact your
dealer as soon as possible. Report this information and both the
error message and code number to your dealer.
The following table lists all the error codes and messages that
may appear during power-on diagnostics checks. If you receive
an error message, look it up in the table below. It directs you to
the proper troubleshooting section in this appendix. If you do
not see an error message, read the section that covers your
problem.
Power-cm diagnostics error codes and messages
Error code
Message
Action
System board
101
System board error
Contact dealer
102
System board error
103
System board error
105
System board error
106
System board error
107
System board error
108
System board error
Real-time clock
161
System options not set
Contact dealer
162
System options not set
Run Setup; see
Chapter 2
163
Time and date not set
Run Setup; see
Chapter 2
164
Memory size error
Run Setup; see
Chapter 7
Troubleshooting D-3