beautypg.com

How to use this appendix – Epson 386/25 User Manual

Page 208

background image

How to Use This Appendix

The instructions in this appendix describe how to install and

remove optional Epson diskette and hard disk drives. All drives
sold by Epson for the Equity 386/25 PLUS are qualified and

recommended for use in this system. Your drive may look a bit

different from the one illustrated in this appendix, but you

install it the same way.

If you are installing or removing a non-Epson drive, some of

the steps in this appendix may not apply to your drive; see the
documentation that came with it for more information.

Each section describes a part of the process you may need to

perform. Here are the guidelines:

❏ Before you perform any of the procedures described in this

appendix, follow the steps in Chapter 5 to remove the

computer’s cover.

❏ If you are removing your only hard disk drive, see

“Removing a Hard Disk from the Vertical Position” on page

B-24.

If you are installing a hard disk drive or removing one and

leaving another in the computer, follow the steps under

“Setting the Hard Disk Drive Jumpers” on page B-4 first.

❏ If you are installing or removing a diskette drive and you

currently have a hard disk drive installed in the vertical
mounting position, see “Removing a Hard Disk from the

Vertical Position” on page B-24.

❏ If you are installing or removing a diskette drive and you do

not have a hard disk drive installed in the vertical mounting

position, see “Installing or Removing a Disk Drive in the

Horizontal Position” on page B-27.

Additional instructions in each section tell you which steps to
perform next.

Installing and Removing Disk Drives

B-3