Epson 386/25 User Manual
Page 195
Follow these steps to install the drivers:
1.
Run the VGA Driver Setup program on your Utility 1
diskette to copy the Generic CADD drivers to your hard
disk. See “Using the VGA Driver Setup Program” on page
A-4 for instructions.
When Setup asks for the name of the drive and directory to
contain the driver files, erase the default name and enter the
name of the directory containing your Generic CADD
program files.
2.
Log onto your Generic CADD directory.
3.
Identify the name of the driver file for the resolution you
want to use in the list at the beginning of this section.
Rename that driver file to the name VGA.VGD. For
example, if you want to use the 1024
x
768, 16-color
graphics driver, type the following and press
Enter:
REN CHIPS768.VID VGA.VGD
Configuring Generic CADD
1.
Type the following and press
Enter
to run the Generic
CADD configuration program:
CONFIG
2. Selectoption
1,Select a Video Graphic
Display.
3.
Enter the appropriate number for the display driver you
want to use.
4.
Press
E
SC
and then Y to exit the Generic CADD
configuration program.
Using the VGA
Utilities
A-53