Epson 386/25 User Manual
Page 49
If you want to return to the password submenu without
saving any changes, press Esc.
5.
After you enter a password, press
Enter
to return to the
password submenu.
6.
If you want to change the network server mode setting,
highlight
Network server mode
. To turn network
server mode on or
off,
press
Enter.
You must set a power-on password to turn on network server
mode. If you did not yet enter a password, this message
appears:
Set a power-on password first
To enter a password, highlight
Power-on password
and follow steps 3 through 5 above.
7.
After you enter a power-on password and turn network
server mode on or off, highlight
* * * *
SAVE
SETTINGS
* * * *
and press
Enter
to return to the main
Setup menu.
Running the Setup Program
2-11