Epson 386/25 - Manual (Page 55)

2.
3.
4.
5.
6.
7.
8.
To change any of the settings, press Enter. The cursor block
moves into the submenu and the Speaker option is
highlighted.
To enable or disable the speaker (turn it on or off), press
Enter.
To turn the initial num lock setting on or off, highlight
Initial num lock and press Enter.
To change the keyboard repeat rate, highlight
KB repeat rate. You see the following option menu:
Press Enter to move the cursor block into the menu.
Use or to highlight the speed you want and press Enter.
Highlight *** SAVE SETTINGS * * * and press
Enter to return to the main Setup menu.
Setting the Real-time Clock
The real-time clock in your computer continuously tracks the
time and date-even when the computer is turned off. The first
time you run Setup, use the Real-time clock option to
set the time and date for your computer. You may need to use
this option again later to adjust your clock for daylight savings
time. The computer automatically changes the date for leap
years.
Running the Setup Program 2-17