Epson 386/25 - Manual (Page 192)

Installing the Drivers
If you have not already installed CADVANCE 3.50 on your
computer, follow the instructions in your CADVANCE
documentation to install it.
Follow these steps to install the drivers:
1. Run the VGA Driver Setup program on your Utility 1
diskette to copy the CADVANCE 3.50 drivers to your hard
disk. See “Using the VGA Driver Setup Program” on page
A-4 for instructions.
When Setup asks for the name of the drive and directory to
contain the driver files, erase the default name and enter the
directory containing your CADVANCE 3.50 program files.
2. Log onto the CADVANCE directory on your hard disk.
3. Type the following and press Enter to delete the old display
driver file:
DEL GS.DRV
4. Identify the name of the driver file for the resolution you
want to use from the list at the beginning of this section.
Rename that driver file to the name GS.DRV. For example,
if you want to use the 1024 x 768, 16-color graphics driver,
type the following and press Enter:
REN GS768.DRV GS.DRV
A-50 Using the VGA Utilities